In recent years, due to the gradual maturity of the lighting industry, landscape lights have been at a peak period. With the decrease in prices, the demand for landscape lights continues to grow, and the development of landscape lights has also improved.
So what is the difference between landscape light cleaning and ordinary street light? Regarding how to clean the landscape lights.
The landscape lamp has a beautiful appearance. Because it is different from the traditional ordinary street lamp, the cleaning process is also more cumbersome. However, its cleaning is also a very complicated process, which is different from the cleaning of other fluorescent lamps.
Landscape lamp cleaning is a very complicated process, and there are usually solar lamp cleaning specialists. Sub-professionals generally do not know how to clean. The cleaning of different types of light sources is different. Different types of lamps use different cleaning agents. Generally, special cleaning water or cleaning paste is used for cleaning. You can also use citric acid bought in a chemical store. The citric acid is diluted with water and soaked overnight, and then the cleaning process is carried out. It also has a lot of precautions, if you don’t pay attention May cause damage to the wick.
Forging and casting are generally used in the current market. Although landscape lights have been developing, the cleaning problem still cannot be ignored. Once you are not paying attention, it is easier to cause damage. Of course, it is particularly important to choose a landscape lamp manufacturer with guaranteed quality.
For the site selection of the landscape light wind turbine, it takes several years of actual measurement and other comprehensive factors to determine the installation location of the wind turbine. Often there are already living houses, etc., and then choose a site to install the wind turbine. Under such conditions, when choosing a small wind turbine installation site, you should pay attention to the following two points:
1. The height of the wind turbine wheel
The vertical shear of the wind speed within the height of the wind turbine rotor should be small. The vertical shear of the wind speed refers to the difference in the wind speed at all levels in the height direction. This is caused by the terrain and the roughness of the ground. The vertical shear causes the rotor blades Under the action of uneven distribution of force, it is easy to cause damage to the wind wheel. In order to avoid the influence of the vertical shear of wind speed on the wind wheel, a suitable installation height of the wind turbine should be selected.
When the wind turbine must be installed in a place close to the house where there are many obstacles, the installation height of the wind turbine should be increased.